Plastics 101 : Manufactoring techniques, Extrusion and Rotational Molding

 

1. Extrusion:

  • Process: plastic is pushed through a shaped opening similar to a toothpaste tube.

  • Final product: pipes, straws, window frames, or plastic sheets.

This process creates continuous profiles by forcing molten plastic through a shaped opening:

  • Step 1: plastic pellets are fed into a hopper.
  • Step 2: a rotating screw melts and pushes the plastic forward.
  • Step 3: the molten plastic is forced through a shaped die (shaped opening).
  • Step 4: the extruded plastic is cooled off.
  • Step 5: the continuous product is cut to length or wound around rolls.

The below diagram illustrates the whole process:

2. Rotational Molding:

  • Process: plastic powder is put in a mold that spins as it heats up. 

  • Final product: large tanks, playground slides, kayaks, or traffic cones.

This process creates hollow parts by rotating a mold containing plastic powder:

  • Step 1: plastic powder is loaded into a hollow mold.

  • Step 2: the mold rotates on two axes while being heated.

  • Step 3: as it rotates, the molten plastic coats the inside surface evenly.

  • Step 4: the mold continues rotating as it cools off.

  • Step 5: the finished part is removed from the mold.

The below diagram illustrates the whole process:


Comments